Instrument Transmitter CallibrationDescription
This is a simple tool that works out the callibration details for an analog transmitter. Transmitter outputs of 4 to 20 mA, 0 to 20 mA or 1 to 5 V are supported.
The tool provides a callibration table for loop check along with a chart. The typical 5 point check values (0%, 25%, 50%, 75% and 100%) are highlighted in the table for reference during transmitter loop checks. In addition, the tool has a calculator to help calculate the process values for a given transmitter output.
Download.xlsx file (20 KB)
How to useChoose the transmitter output type from the drop box and fill in the transmitter details in the cells provided.
The callibration table and chart are automatically updated. The red dotted lines on the chart indicate over/under range values.
To calculate the transmitter reading for a given output, use the scrollbar or use enter the value in the cell to the right of the scrollbar. The process value is calculated automatically.
These values are also shown on the chart.